Sku : EL648

ABLOY EL648 Motor Lock

ABLOY EL648 Motor Lock
The EL648 is a heavy duty motor lock with hook bolt for narrow style doors. They provide superior mechanical strength against physical attack. The EL648 is used in high security auxiliary lock in applications such as gates and exterior doors of industrial premises, shopping centres, business premises etc. The lock is especially suited for sliding doors as it can be installed in the door frame or the door leaf. EL648 is ideal for night locking that requires greater strength and security. The lock can be controlled by a variety of electrical impulse generating equipment such as a card reader, keypad or timer. This lock is suitable for use with sliding door operators.

Key Features

High security motor bolt.
Lock case is connected with a separate control unit.
12-24Vdc operating voltage
Configuration of deadbolt either 14mm or 20mm
Increased protection against manipulation
Striker plate includes door position magnet.
Fully monitored, bolt in/bolt out, door position manual operation
Can configure lock in fail safe and fail secure (Backup card required to set the lock case to go to desired position in case of power failure)
Note: Lock requires EA460 Control unit to operate.

Voltage

24Vdc ± 15% stabilised

Current

Idle 70mA, Normal 150mA and Max 750mA

Monitoring

Door position, Bolt Position Mechanical trigger

Environment

Operational temperature range -25°C to +70°C

Case/ Cover

High purity Zinc alloy construction

Backset

25mm or 35mm

Latchbolts

Bolt throw: 22mm Hook bolt

Cylinder

Scandinavian oval type, Finnish type

Cabling

Recommended cable: 18AWG (0.82mm2) cable runs up to 30m

Furniture

ABLOY Architectural Hardware

Standard Finishes

Chrome plated steel forend, yellow chrome, lacquered lock body.

Specification Statement

The mortice lock must consist of high grade pure zinc alloy. The bolt must be controlled by means of motor and the shape of the bolt must be in hook shape for added security. A separate controller needs to be connected to the lock to enable trigger and monitoring functions. The voltage must be variable between 12-24Vdc with tolerance of 15% up or down. The following parts need to be fully monitored; bolt position, door position by means of dry contacts. The lock must be suitable for internal and external use.